<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:sy="http://purl.org/rss/1.0/modules/syndication/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0">
  <channel>
    <title>Chemical Process Design</title>
    <link>https://cpd.usb.ac.ir/</link>
    <description>Chemical Process Design</description>
    <atom:link href="" rel="self" type="application/rss+xml"/>
    <language>en</language>
    <sy:updatePeriod>daily</sy:updatePeriod>
    <sy:updateFrequency>1</sy:updateFrequency>
    <pubDate>Tue, 01 Dec 2026 00:00:00 +0330</pubDate>
    <lastBuildDate>Tue, 01 Dec 2026 00:00:00 +0330</lastBuildDate>
    <item>
      <title>Sustainable and Intelligent Approaches to Modern Chemical Process Design</title>
      <link>https://cpd.usb.ac.ir/article_10149.html</link>
      <description>It is our pleasure to present this new issue of Chemical Process Design. This issue continues the journal&amp;amp;rsquo;s mission to publish high-quality research that advances the design, modeling, optimization, and sustainable development of chemical and energy-related processes. The contributions reflect the evolving landscape of modern chemical engineering, where sustainability, advanced materials, artificial intelligence, process simulation, resource recovery, and safety increasingly shape both research and industrial practice.Several contributions in this issue focus on sustainable materials and environmental applications. Studies on the green synthesis of copper oxide nanoparticles, surfactant-modified zeolites for copper removal, and Mg-modified biomass for cobalt biosorption highlight the potential of environmentally benign and low-cost materials for pollution control and resource recovery.Energy efficiency and sustainable process integration form another important theme. Research on the vacuum drying of magnesium hydroxide using recovered industrial waste heat and solar-assisted multi-effect distillation demonstrates how waste heat and renewable energy can be integrated into chemical and desalination processes to improve resource and energy efficiency.The growing role of artificial intelligence and data-driven modeling is also highlighted. Contributions employ neural networks for hydrodynamic prediction, response surface methodology for viscosity modeling, and machine-learning algorithms for near-real-time COD prediction in wastewater treatment. These studies demonstrate the increasing integration of experimental data, statistical methods, and AI into process monitoring, prediction, and optimization.The issue further addresses uncertainty-aware reactor design, process adaptation, safety, and dynamic separation. Uncertainty quantification is incorporated into photocatalytic reactor design, while process simulation is used to evaluate refinery feed adaptation. Dynamic modeling of fire-induced domino effects and transient krypton isotope separation further emphasizes the importance of safety, reliability, and dynamic behavior in modern process design.Together, these contributions illustrate the broad and evolving scope of chemical process design&amp;amp;mdash;from sustainable materials and energy integration to artificial intelligence, uncertainty analysis, industrial simulation, safety, and advanced separation. They emphasize that future progress will increasingly depend on integrating mechanistic understanding, experimental data, computational intelligence, sustainability, and industrial knowledge to develop more efficient, reliable, flexible, and environmentally responsible processes.We hope that the findings presented in this issue will provide valuable insights for researchers, engineers, and practitioners working toward the development of next-generation chemical and energy processes.We sincerely thank the authors for submitting their valuable work to Chemical Process Design. We also extend our appreciation to the reviewers for their careful evaluations and constructive feedback, and to the members of the editorial board for their continued dedication to maintaining the scientific quality of the journal. We hope that this issue will stimulate further research and collaboration in the field of chemical process design.</description>
    </item>
    <item>
      <title>A Review of Green Synthesis of Copper Oxide Nanoparticles</title>
      <link>https://cpd.usb.ac.ir/article_9629.html</link>
      <description>Copper oxide nanoparticles (CuO NPs) have emerged as versatile nanomaterials with significant potential in biomedical and environmental applications, primarily due to their remarkable antimicrobial, antioxidant, and catalytic properties. Various synthesis routes, including physical, chemical, and biological methods, have been explored to produce CuO Nano particls with controlled morphology, crystallinity, and functionality. However, conventional physical and chemical approaches are often expensive, energy intensive, and involve the use of toxic reagents that pose serious risks to human health and the environment. In contrast, biological or green synthesis represents a sustainable, eco-friendly, and economically feasible alternative that employs biological entities such as plants, bacteria, fungi, and algae as efficient reducing and stabilizing agents. This environmentally benign process enables the fabrication of nanoparticles with desirable physicochemical features and enhanced biocompatibility. The present review comprehensively discusses recent advances in the green synthesis of CuO nano particles, emphasizing plant mediated strategies and their potential biomedical applications.</description>
    </item>
    <item>
      <title>Prediction of the Local Particle Velocity in the Spout Region of Cylindrical Spouted Beds Using an Artificial Neural Network</title>
      <link>https://cpd.usb.ac.ir/article_9703.html</link>
      <description>The local particle velocity is an important hydrodynamic parameter in the design and optimization of gas-solid systems, such as the spouted beds. Predicting the particle velocity in the spout region is often complex, and developing a simple and reliable method for estimating this parameter is both valuable and highly beneficial for engineers and system designers. In the present study, the intelligent predictive approach of a multi-layer perceptron neural network (MLP-NN) is used for the first time to investigate the feasibility of measuring the local particle velocity within the spout region of spouted beds. Accordingly, 224 measured data points are collected, covering a broad range of factors such as bed diameter, inlet diameter, static bed height, cone angle, minimum spouting velocity, and inlet gas velocity for Geldart D particles with varying densities and diameters. The data are then used for training, validating, and testing the intelligence-based model. The MLP-NN-based model shows a strong predictive capability for estimating particle velocity in the spouted bed, with an Average Absolute Relative Error (AARE) of 13.32%, an R2 value of 0.9842, and a Root Mean Squared Error (RMSE) of 0.033 for the test dataset. In addition, for all data, the model achieves an AARE of 6.30%, an RMSE of 0.0098, and an R2 value of 0.9942. Furthermore, in the present study, a sensitivity analysis is conducted on the data to determine the degree of influence of the input parameters on the target function.</description>
    </item>
    <item>
      <title>Elucidating Adsorption Mechanisms of Copper Ions on Surfactant-Modified Zeolites: An Integrated Study of Isotherm Modeling and Surface Characterization</title>
      <link>https://cpd.usb.ac.ir/article_9729.html</link>
      <description>This research examines the adsorption mechanisms pertaining to copper ions on clinoptilolite zeolite that has been modified with cationic (CTAB) and anionic (SDS) surfactants. Given that the fundamental principles that dictate adsorption phenomena, particularly the influence of surfactant charge, are not thoroughly comprehended, this investigation adopts a comprehensive methodology that integrates isotherm modeling alongside surface characterization data to scrutinize the adsorption dynamics. Equilibrium data were subjected to analysis through a variety of isotherm models. The findings indicated that the SDS-modified zeolite demonstrated a significantly enhanced adsorption capacity (19.56 mg/g), which is more than twice that of the unmodified zeolite (8.98 mg/g). The adsorption behavior was most accurately represented by the Redlich-Peterson isotherm, with the observed performance improvement ascribed to the synergistic effects resulting from an increased specific surface area and favorable electrostatic interactions. In contrast, zeolite modified with CTAB exhibited a diminished adsorption capacity of 7.08 mg/g, while the Frumkin isotherm suggested the presence of repulsive interactions. For the unaltered zeolite, the Weber-van Vliet model yielded the most accurate representation, indicating a hybrid mechanism of adsorption. This research underscores the notion that the charge of the surfactant is a pivotal determinant of the adsorption mechanism. By disentangling the influences of surface area from electrostatic interactions, it establishes a quantitative framework for the development of effective adsorbents.</description>
    </item>
    <item>
      <title>Domino Modeling of Process Events using the Graph Method and the Minimum Evolution Time Algorithm with Visibility Coefficient in Oil Product Storage Tanks in Sabzevar Region</title>
      <link>https://cpd.usb.ac.ir/article_9798.html</link>
      <description>One of the most critical threats to the safety and stability of process units is the occurrence of domino events triggered by fires or explosions. Accurate prediction of the temporal and spatial evolution of such events is therefore essential for safe facility layout design and emergency response planning. This study presents a dynamic numerical framework to forecast the spatio-temporal progression of fire-induced domino events in a cluster of petroleum product storage tanks located in the Sabzevar region. The model integrates the minimum evolution time algorithm with a graph-based structure to visualize tank ignition sequences. The heat radiation capability (HRC) serves as the primary escalation indicator, while a visibility coefficient is incorporated to refine the representation of thermal radiation transfer between tanks. Implemented in MATLAB, the model accepts inputs including tank geometry (type, dimensions, volume), product properties (burning rate), geographical coordinates, and HRC values derived from PHAST software, experimental data, or theoretical correlations. It supports both atmospheric and pressurized tanks (cylindrical or spherical) with no restrictions on tank count or layout complexity. Outputs include spatio-temporal event sequences, graphical overlays on offline satellite maps, and time-evolution tables. The results demonstrate high computational efficiency, enabling rapid data generation for emergency decision-making, quantitative domino risk assessment, and optimal tank placement.</description>
    </item>
    <item>
      <title>Vacuum Drying of Magnesium Hydroxide Using Steelmaking Ladle Hot Air as an Alternative Heat Source</title>
      <link>https://cpd.usb.ac.ir/article_9802.html</link>
      <description>The growing application of magnesium in strategic industries underscores the need for sustainable and energy-efficient routes for producing high-purity magnesium compounds. In this study, a vacuum drying system was designed and fabricated to enable the recovery of magnesium hydroxide from desalination effluent, and its drying performance was evaluated. Experiments were carried out at three operating pressures (0.10, 0.05, and 0.02 bar) and three temperatures (150, 210, and 250&amp;amp;deg;C), utilizing hot air recovered from steelmaking ladles as an industrial waste-heat source. The results showed that reducing the operating pressure significantly decreased the drying time while enhancing the mass transfer rate. At 0.02 bar, the time required to reach the target final moisture content was markedly shorter than that at 0.10 bar, with an average reduction of approximately 50%. Moreover, increasing the drying temperature from 150 to 250&amp;amp;deg;C led to a substantial acceleration of the drying process, resulting in an overall reduction of 69.2% in total drying time. Drying kinetics were analyzed using logarithmic and two-term exponential models. Statistical evaluation revealed that the logarithmic model provided superior predictive performance, exhibiting a high coefficient of determination (R&amp;amp;sup2; =0.99) and lowest root mean square error (RMSE=0.012) across all operating conditions. Overall, this study demonstrates that the integration of vacuum drying with the utilization of steelmaking waste heat represents an efficient and sustainable approach for the recovery of magnesium hydroxide from desalination effluents, offering both technical effectiveness and industrial relevance.</description>
    </item>
    <item>
      <title>Simulation and Feasibility Assessment of Normal Butane Substitution for LPG Feed in the Alkylation Unit</title>
      <link>https://cpd.usb.ac.ir/article_9803.html</link>
      <description>The strategic demand for propylene in the market leads to the conventional LPG feedstock is now redirected, with the C₃ fraction sent to the Propylene Recovery Unit (PRU). This operational adjustment left the alkylation unit primarily reliant on C₄ feed, prompting a comprehensive investigation of alternative feed scenarios to optimize product yield and process economics. In this study, steady-state process simulations were performed using Aspen HYSYS to evaluate the feasibility of replacing the LPG feed with surplus normal butane in the unit. Three scenarios were investigated: (i) baseline operation with standard LPG feed, (ii) replacement of the propane fraction with normal butane, and (iii) replacement of the isobutane fraction with normal butane. The simulation results demonstrated that the substitution of normal butane for propane in the LPG feed is technically feasible, achieving a net alkylate yield of 15.48 ton/h with product quality comparable to industrial benchmarks. However, replacing isobutane with normal butane resulted in a drastic drop in alkylate production, with net output falling to 4.72 ton/h, rendering this scenario economically unviable. Validation against plant process flow diagrams (PFDs) confirmed the simulation&amp;amp;rsquo;s reliability within acceptable error margins. The findings also highlight the importance of effective feedstock management in alkylation units while partial replacement of LPG with normal butane can optimize resource utilization and meet operational demands, the critical role of isobutane in achieving high alkylate yield and purity must be preserved. The study offers practical implications for the strategic adaptation of Iranian refineries facing changing feedstock availability and market priorities.</description>
    </item>
    <item>
      <title>Uncertainty-Quantified Kinetic Model Discrimination for Photocatalytic Reactor Design: A Bootstrap Based Framework</title>
      <link>https://cpd.usb.ac.ir/article_10038.html</link>
      <description>Translating laboratory-scale photocatalytic batch data into continuous reactor design remains a critical challenge in reaction engineering, particularly when kinetic model selection is based solely on the coefficient of determination (R&amp;amp;sup2;) and parameter uncertainty is ignored. In this study, a data-driven framework is developed that integrates nonlinear kinetic model discrimination, bootstrap-based uncertainty quantification, and uncertainty propagation into plug-flow reactor (PFR) sizing. Time&amp;amp;ndash;concentration data from methylene blue degradation over a WO₃/BiVO₄ photocatalyst (C0 = 10 mg L⁻&amp;amp;sup1;) were fitted to six nonlinear kinetic models using Particle Swarm Optimization (PSO). Model discrimination was performed using the bias-corrected Akaike Information Criterion (AICc) and Akaike weights, decisively selecting the Elovich model (&amp;amp;Delta;AICc &amp;amp;gt; 30 vs. pseudo-first-order; Akaike weight &amp;amp;gt; 0.99). Parameter uncertainty was quantified via nonparametric bootstrap resampling (2000 replicates), yielding well-constrained 95% confidence intervals (&amp;amp;alpha;: 2.02-2.28 mg g⁻&amp;amp;sup1; min⁻&amp;amp;sup1;; &amp;amp;beta;: 0.34-0.42 g mg⁻&amp;amp;sup1;). The identified kinetics were embedded into a steady-state PFR model, and bootstrap parameter distributions were propagated to generate a reactor length design envelope for 90% pollutant removal. The nominal reactor length was 1.25 m, with a 95% confidence interval of 1.18-1.35 m (&amp;amp;plusmn;7%). This narrow design envelope demonstrates robust parameter identifiability and provides a statistically defensible basis for reactor sizing, moving beyond single-point deterministic estimates. The proposed methodology offers a transferable framework for integrating nonlinear kinetic discrimination and uncertainty quantification into photocatalytic reactor engineering.</description>
    </item>
    <item>
      <title>Modeling and Statistical Analysis on the Viscosity of Aqueous Solution of Xanthan Gum as Drag Reducing Agent Using RSM</title>
      <link>https://cpd.usb.ac.ir/article_10039.html</link>
      <description>Polymeric drag-reducing agents (DRAs) have shown significant advantages for industrial applications following over seven decades of study. An experiment and statistical study were carried out to develop an equation for the viscosity of XG solution in water as a DRA using response surface methodology (RSM). The research was conducted under experimental settings with a concentration range of C=50-1000 ppm and temperature between T=30-50 &amp;amp;deg;C. Different models were evaluated based on a series of quality metrics and plots. After examining the quality metrics and plots of different models, it was concluded that the quadratic model was the most appropriate choice. The values of standard deviation (Std.Dev), coefficient of determination (R2) and coefficient of variation (C.V) for the quadratic model were 0.0001, 0.9959, and 4.37, respectively. The outcomes of the RSM model were compared with 6 equations found in the literature. The results indicated that the RSM model had the smallest average absolute relative deviation (AARD=5.39%) when estimating the dynamic viscosity of aqueous XG solution. Finally, the prediction quality of the RSM model was examined with experimental data from literature. The results showed that the proposed equation can predict the viscosity of water-soluble DRAs with acceptable accuracy with a relative deviation of less than 19%. The application of RSM cuts down on experimental costs and time, in addition to helping identify the most suitable model.</description>
    </item>
    <item>
      <title>Mathematical Modeling of Multi-Effect Desalination System with Direct Solar Radiation</title>
      <link>https://cpd.usb.ac.ir/article_10087.html</link>
      <description>Multi-effect distillation (MED) is one of the most widely used technologies for freshwater production in regions facing shortages of potable, agricultural, or industrial water, owing to its operation based on successive evaporation&amp;amp;ndash;condensation processes. This study investigates the effects of direct solar radiation and feed water temperature on the performance ratio of an MED desalination system. The novelty of this work lies in the direct and explicit coupling of solar radiation with the internal energy balances of the MED effects, allowing for a more realistic and fully coupled simulation of solar-assisted desalination performance. To this end, a precise numerical&amp;amp;ndash;algebraic hybrid approach capable of providing a fully parametric solution is employed. The mathematical model is developed based on the governing momentum, mass, and energy balance equations. The model predictions show good agreement with published data [8], with a maximum deviation of 0.1% observed at N=4 The results indicate that the performance ratio increases with the number of desalination effects under all investigated conditions. Under no-solar conditions, the highest performance ratio is obtained for a 12-effect system at 80 &amp;amp;deg;C, reaching a value of 12.05, whereas the inclusion of solar radiation increases the performance ratio up to 14.56. Moreover, increasing solar radiation from 0 to 1100 W/m&amp;amp;sup2; enhances the performance ratio, with maximum increases of 22.1%, 20.1%, and 19.5% for systems with 4, 6, and 8 effects, respectively. A sensitivity assessment further confirms that the performance ratio is more responsive to variations in solar radiation than to changes in feed water temperature.</description>
    </item>
    <item>
      <title>Continuous Biosorption of Co (II) onto Mg-Modified Sargassum sp. Brown Algae in a Fixed Bed Column</title>
      <link>https://cpd.usb.ac.ir/article_10092.html</link>
      <description>In this research, the potential of Sargassum sp. brown algae was studied to adsorb cobalt from aqueous solutions in a fixed bed column. The effects of key operating parameters, including feed flow rate (1&amp;amp;ndash;4 mL/min), bed height (4&amp;amp;ndash;9 cm), and inlet cobalt concentration (50&amp;amp;ndash;150 mg/L), on uptake were investigated. FTIR analysis was performed to identify the vibrational variations associated with the surface functional group peaks. The FTIR tests showed that hydroxyl, amine, amide, methylene and carboxyl functional groups may have the greatest contribution in the ion exchange mechanism. Moreover, SEM analysis was conducted to investigate the morphological variations in the biosorbent due to the sorption process. Under the studied conditions, the maximum adsorption in the column was achieved at a flow rate of 1 mL/min, a bed height of 9 cm, and an initial influent concentration of 150 mg/L, reaching 79.83 mg/g. Adsorption breakthrough curves were modeled using Thomas, Yoon-Nelson and Adams&amp;amp;ndash;Bohart models. Among the evaluated breakthrough models, the Thomas model provided the most suitable description of Co(II) adsorption behavior, yielding a maximum adsorption capacity of&amp;amp;nbsp; qTh=81.93&amp;amp;thinsp;mg/g and a Thomas rate constant of kTh=1.15&amp;amp;times;10&amp;amp;minus;5 L/min.mg. These results suggest that Sargassum sp. can be considered a promising and efficient option for cobalt removal from aqueous solutions in water treatment processes.</description>
    </item>
    <item>
      <title>Unsteady State Performance and Stabilization Time in Square Cascades for Stable Krypton Isotope Separation</title>
      <link>https://cpd.usb.ac.ir/article_10093.html</link>
      <description>The inherently low single stage separation factor of stable krypton isotopes makes their enrichment through multistage cascades a challenging task, requiring precise optimization of cascade parameters and a thorough understanding of transient behavior. In this work, we numerically investigate the unsteady state performance of a square cascade for krypton isotope separation, using a multicomponent mass balance model discretized by the Crank&amp;amp;ndash;Nicolson scheme and solved iteratively via a q method. The study focuses on how two key design variables&amp;amp;mdash;the cascade cut (&amp;amp;theta;) and the unit separation factor (&amp;amp;alpha;)&amp;amp;mdash;affect the stabilization time of individual isotopes and of the entire system. Simulations are conducted for &amp;amp;theta; = 0.142 (targeting light isotopes in the product) and &amp;amp;theta; = 0.827 (targeting heavy isotopes in the waste), at &amp;amp;alpha; = 1.2 and 1.4. Results reveal that the isotope governing the overall transient response is not fixed: at low cut, intermediate isotope Kr 82 controls the stabilization (&amp;amp;asymp;184 min), whereas at high cut, the heaviest isotope Kr 86 becomes the rate limiting component (&amp;amp;asymp;150&amp;amp;ndash;884 min depending on &amp;amp;alpha;). Increasing &amp;amp;alpha; from 1.2 to 1.4 substantially prolongs the global steady state attainment&amp;amp;mdash;from ~190 to ~481 min at &amp;amp;theta; = 0.142, and from ~156 to ~941 min at &amp;amp;theta; = 0.827&amp;amp;mdash;due to sharper concentration gradients and stronger interstage coupling. These findings demonstrate that steady state analysis alone is insufficient for cascade design; transient simulation is essential to correctly identify the bottleneck isotope and to optimize start up strategies.</description>
    </item>
    <item>
      <title>Real-Time COD Prediction in Full-Scale Wastewater Treatment Using Ensemble Learning Models and Systematic Feature Selection</title>
      <link>https://cpd.usb.ac.ir/article_10094.html</link>
      <description>Accurate and timely prediction of Chemical Oxygen Demand (COD) is essential for efficient wastewater treatment plant (WWTP) operation; however, conventional laboratory-based COD measurements are time-consuming and unsuitable for real-time process monitoring. This study develops and compares three ensemble machine learning models&amp;amp;mdash;Random Forest (RF), XGBoost, and LightGBM&amp;amp;mdash;for COD prediction using six years of operational data collected from the full-scale Melbourne Eastern Treatment Plant. A multi-stage feature selection framework combining Average Rank aggregation, Pearson correlation analysis, and Sequential Backward Elimination was employed to reduce the original 19-variable input space to an optimal subset of five predictors: Total Nitrogen (TN), Biological Oxygen Demand (BOD), year, mean air temperature, and minimum air temperature. Model hyperparameters were optimized using Randomized Search with Time Series Split cross-validation, and predictive performance was evaluated using a chronological train&amp;amp;ndash;test split. The results demonstrated that feature selection improved model generalization while reducing model complexity. Among the evaluated algorithms, LightGBM achieved the highest predictive performance on the test dataset (R&amp;amp;sup2; = 0.716, RMSE = 76.30 mg/L, and MAE = 56.59 mg/L), outperforming XGBoost (R&amp;amp;sup2; = 0.682) and RF (R&amp;amp;sup2; = 0.653). TN and BOD consistently emerged as the most influential predictors across all models, highlighting their strong relationship with COD dynamics in wastewater treatment processes. Overall, the findings indicate that LightGBM combined with a systematic feature selection strategy provides an efficient and practically deployable framework for near-real-time COD prediction, offering a promising alternative to conventional laboratory analyses for WWTP monitoring and control.</description>
    </item>
    <item>
      <title>Thermal Degradation Kinetics of Cellulose: Mechanisms and Implications for Sustainable Energy</title>
      <link>https://cpd.usb.ac.ir/article_10168.html</link>
      <description>Cellulose is a key constituent of biomass and an important material for sustainable energy and fire-safe applications. Despite extensive studies on cellulose pyrolysis, the dominant degradation mechanism under strictly isothermal conditions remains insufficiently clarified. In this work, the thermal degradation kinetics of cellulose were systematically investigated using isothermal thermogravimetric analysis (TGA) within a narrow temperature range of 580&amp;amp;ndash;610 K. Both model-fitting and iso-conversional (model-free) approaches were employed to determine kinetic parameters and identify the governing reaction mechanism. The results demonstrate that cellulose degradation is predominantly governed by geometric contraction mechanisms, specifically contracting area and contracting volume models, indicating that the reaction rate is controlled by progressive reduction of the reactive interface. Power-law behavior with exponents of 1/2 and 1/3 was observed at the early stages of conversion, while nucleation and diffusion models showed limited applicability. The apparent activation energy was determined to be in the range of 1.75&amp;amp;ndash;2.79 &amp;amp;times; 10⁸ J&amp;amp;middot;kmol-1, indicating a relatively low energy barrier for cellulose decomposition under isothermal conditions. The novelty of this study lies in the combination of strictly isothermal analysis, narrow temperature control, and comprehensive comparison of solid-state kinetic models, enabling clear identification of the dominant degradation mechanism. A predictive kinetic equation for cellulose degradation was developed, providing useful insights for reactor design, biomass conversion, and flame-retardant material development.</description>
    </item>
    <item>
      <title>Mitigation of Membrane Fouling in Microfiltration by Ozone Pretreatment: A Comparative Study on Flux Recovery, Fouling Reversibility, and Cake Layer Morphology</title>
      <link>https://cpd.usb.ac.ir/article_10169.html</link>
      <description>Membrane fouling remains the primary operational bottleneck limiting the efficiency of microfiltration (MF) processes in water treatment. This study introduces ozonation as a chemical pretreatment strategy to mitigate fouling in a custom-fabricated ceramic MF membrane. An alumina-based membrane with a peak pore size of 350 nm was successfully fabricated via gel-casting and characterized using FESEM and FTIR, revealing a homogeneous microstructure with a narrow pore size distribution. The integrated ozone-MF (O3-MF) system was evaluated using surface water from the Maroon River. The membrane showed an initial pure water flux of 1100 L.m-2.h-1. In the absence of ozone, rapid and irreversible flux decline occurred, with hydraulic backwashing failing to restore performance. With ozone pretreatment, the membrane exhibited improved flux stability, achieving near-complete flux recovery after each backwash cycle. Based on these flux recovery data and visual observation of the membrane surface, ozonation appeared to alter the fouling layer characteristics, resulting in a less compact and more hydraulically reversible deposit compared to operation without ozone. The O₃-MF system also achieved 71% turbidity reduction, reduced total coliforms and E. coli to below the detection limit of the analytical method (&amp;amp;lt;1.1 MPN/100 mL), and reduced the Silt Density Index (SDI) from 0.25 to below detectable limits, indicating improved effluent quality for downstream applications. These results suggest that the integration of ozonation with MF separation offers an effective low-pressure pretreatment strategy for enhancing membrane operational stability and reducing cleaning frequency.</description>
    </item>
    <item>
      <title>Recent Advances in Structured Sorbents and Honeycomb Adsorbents for CO₂ Capture: Mechanisms, Materials, and Regeneration Strategies</title>
      <link>https://cpd.usb.ac.ir/article_10181.html</link>
      <description>This review critically evaluates recent advances in solid and structured sorbents for CO₂ capture, emphasizing the link between material properties, structured geometry, regeneration, and process performance. Representative sorbent classes typically achieve 2-6.8 mmol/g CO₂ uptake for zeolites and carbons, while selected MOFs can reach higher gravimetric capacities under favorable laboratory conditions; these values are not directly comparable due to differences in temperature, pressure, humidity, gas composition, and active-phase loading. In structured systems the principal advantage is often reduced pressure drop, improved heat and mass transfer, and higher reactor-level efficiency rather than higher intrinsic gravimetric capacity. A recent techno-economic analysis of a DAC monolith showed substantially lower fan work than a packed bed owing to an approximately two-order-of-magnitude reduction in pressure drop, although the packed bed exhibited higher reference productivity (2.4 versus 1.2 kg CO₂/ m3h) and the modeled capture cost remained above 1500 &amp;amp;euro; per tonne of CO₂ at a capture scale of 100 kt CO₂/yr. Electrified regeneration routes, including resistive/electrothermal swing adsorption, microwave, and induction heating, enable rapid and localized heating but face challenges in temperature uniformity, electrical-to-thermal efficiency, materials compatibility, and scale-up. The review argues that adsorbent selection should prioritize working capacity, impurity tolerance, regeneration energy, cyclic stability, pressure drop, volumetric productivity, and cost rather than maximum equilibrium capacity alone. Application-specific criteria are proposed for post-combustion capture, direct air capture, and biogas upgrading, together with research priorities for realistic multicomponent testing and integrated material-process optimization.</description>
    </item>
    <item>
      <title>Thermal Performance Analysis of a Moving Trapezoidal Fin with Temperature-Dependent Variable Thermal Properties Using the Homotopy Perturbation Method</title>
      <link>https://cpd.usb.ac.ir/article_10182.html</link>
      <description>In the present study, the thermal performance of a moving trapezoidal heat fin featuring temperature-dependent thermophysical properties has been evaluated. The governing equation for the temperature distribution of the fin was formulated for two cases: linear and nonlinear thermal conductivity. The governing equation, being a nonlinear ordinary differential equation (ODE), was solved using the Homotopy Perturbation Method (HPM). The results obtained from HPM show good agreement with numerical results from previous studies. Finally, the effects of design and physical parameters on the dimensionless temperature distribution and fin efficiency were investigated. It was found that increasing the fin taper ratio, convection-conduction parameter, temperature ratio parameter, and radiation-conduction parameter leads to a decrease in the dimensionless temperature of the fin. Conversely, increasing the P&amp;amp;eacute;clet number and heat source parameter results in an increase in the dimensionless temperature. Moreover, increasing the aforementioned parameters leads to a reduction in fin efficiency. The dimensionless temperature and fin efficiency for the case of linear thermal conductivity are higher than those for nonlinear thermal conductivity.</description>
    </item>
    <item>
      <title>Deep Eutectic Solvent-Assisted Preparation of Cellulose Nanoparticles from Peanut Shell Waste</title>
      <link>https://cpd.usb.ac.ir/article_10193.html</link>
      <description>This study presents an environmentally friendly method for extracting cellulose from peanut shells&amp;amp;mdash;an abundant agricultural by-product&amp;amp;mdash;and converting it into cellulose nanoparticles (CNPs). Cellulose was extracted using a choline chloride : urea (2:1) deep eutectic solvent (DES) at 90 &amp;amp;deg;C for 3 h, followed by bleaching and subsequent mechanical disintegration using probe ultrasonication. The extracted cellulose and CNPs were characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), and zeta-potential analysis. FT-IR confirmed the substantial removal of non-cellulosic components while preserving cellulose integrity, whereas XRD indicated the retention of the cellulose structure with good crystallinity. FE-SEM and TEM revealed the formation of nanoscale cellulose structures with particle-like morphology. DLS provided quantitative information on the hydrodynamic size distribution and aggregation behavior of CNPs in aqueous suspension, while zeta-potential measurements indicated the colloidal stability of the resulting suspension. Overall, the results demonstrate that the choline chloride : urea DES provides a sustainable alternative to conventional alkaline&amp;amp;ndash;acid processes, avoiding hazardous chemicals while enabling the production of cellulose nanoparticles from peanut shell biomass. The produced CNPs show potential for applications in sustainable packaging, nanocomposites, and other cellulose-based functional materials.</description>
    </item>
    <item>
      <title>Non-Dimensional Benchmarking of Sloshing Simulations in a Pressurized LNG Tank Against a Cryogenic Sloshing Correlation</title>
      <link>https://cpd.usb.ac.ir/article_10248.html</link>
      <description>Sloshing simulations of cryogenic tanks are usually validated against a single pressure history, which cannot show whether interfacial heat and mass transfer is correct in magnitude or correctly partitioned between quiescent and sloshing-induced contributions. This study benchmarks volume-of-fluid simulations with a Hertz&amp;amp;ndash;Knudsen&amp;amp;ndash;Schrage closure of a Type-C tank holding a pseudo-pure pressurized LNG mixture (CH4/C2H6/C3H8/N2 = 90/6/3/1 mol%, 10&amp;amp;ndash;30 bar; CO2 carried only as a passive tracer) against the sloshing Nusselt&amp;amp;ndash;Reynolds correlation of Ludwig et al., using 14 sloshing runs and four matched static runs at a single excitation (0.4 Hz, 3&amp;amp;deg;; ReS = 1.8&amp;amp;ndash;2.2 &amp;amp;times; 105). (1) The extracted sloshing Nusselt numbers (25&amp;amp;ndash;66) lie a factor of 1.6&amp;amp;ndash;4.8 above the correlation; since the absolute level depends on the effective closure coefficient, this indicates order-of-magnitude consistency only. (2) The static runs give NuS = 10.4&amp;amp;ndash;18.6 against unity in the unexcited experiment; this cannot be attributed to the closure coefficient and is traced mainly to eddy diffusion of the k&amp;amp;ndash;&amp;amp;epsilon; model in the stratified static layer. (3) The paired enhancement factor is 2.52&amp;amp;ndash;2.69 for a 60 s window (1.3&amp;amp;ndash;4.3 depending on the window), about six times below the experimental value. (4) The arrest of boundary-layer growth under sloshing is reproduced qualitatively. Because only one excitation was used, the slope of the correlation is not tested, and the 25 and 30 bar results are qualitative owing to the ideal-gas vapor density.</description>
    </item>
    <item>
      <title>Techno-Economic Evaluation of an Optimized Process for Solid Sodium Methoxide Production from Methanol and Sodium Hydroxide</title>
      <link>https://cpd.usb.ac.ir/article_10255.html</link>
      <description>Sodium methoxide is commercially available in both solid and liquid forms in global markets. Its liquid form, typically marketed as a 30 wt.% solution in methanol, has gained the dominant market share in recent years due to the significant growth of biodiesel production. Nevertheless, solid sodium methoxide, owing to its wide range of applications in pharmaceutical industries and chemical synthesis, remains of considerable industrial importance, and the development of its commercial production requires comprehensive techno-economic evaluations. In this study, a process for the production of solid sodium methoxide from methanol and sodium hydroxide solution was designed, simulated, and optimized. Process simulation was carried out using ASPEN Plus software, and mass and energy balances of the individual units were determined. Subsequently, an economic evaluation of the process was performed using the economic analyzer module of ASPEN Plus for production capacitie of 15,000 tons per year, where 10,000 tons were considered as solid sodium methoxide and the remaining capacity as a methanolic solution. The results of the economic analysis demonstrated that the proposed process is economically viable, with an internal rate of return (IRR) of 175% and a payback period of 1.58 years for the specified capacities. The findings of this study indicate that the production of solid sodium methoxide from methanol can be considered an attractive option for the development of the methanol value chain.</description>
    </item>
    <item>
      <title>Design and Thermodynamic Evaluation of An Integrated RO-AGMD-Spray Dryer System for Solar-Powered Zero Liquid Discharged Desalination</title>
      <link>https://cpd.usb.ac.ir/article_10298.html</link>
      <description>This study presents a thermodynamic model of a solar-driven hybrid desalination system integrating reverse osmosis (RO), air gap membrane distillation (AGMD), and a spray dryer to achieve zero liquid discharge (ZLD) and enhance freshwater recovery. In this configuration, seawater is first treated by RO, producing freshwater and a concentrated brine stream that is further processed by AGMD using thermal energy supplied by a parabolic trough collector (PTC). The remaining brine is converted into solid salt via spray drying, eliminating liquid waste. A combined modeling framework is developed, including an element-wise solution&amp;amp;ndash;diffusion model for RO and system-level models for AGMD, PTC, and the spray dryer. The model predicts freshwater production, energy consumption, and salt recovery under varying operating conditions. At a feed flow rate of 16,000 L/h, the hybrid system produces approximately 9,300 L/h of freshwater, compared to 4,800 L/h for a standalone RO system. Although electrical energy consumption increases from 19 to 23.5 kWh/h, solar thermal input improves overall efficiency. The system achieves up to 135 kg/h of solid salt with product water quality below 500 mg/L TDS. The proposed system offers improved water recovery, effective brine management, and a sustainable solution for water-scarce regions.</description>
    </item>
  </channel>
</rss>
